View and Remove Photo Metadata

A photo carries information you cannot see: where it was taken (GPS coordinates), when, with which device and sometimes the owner’s name. Check what is inside before you post or send it, then remove everything or only the location. The picture itself is not re-compressed, only the information blocks are dropped, and the photo never leaves this browser.

    How to view and remove photo metadata

    1. Drop photos into the box above, or click itTap the box above to choose one or more photos. JPG, PNG, WebP and HEIC work. Nothing is uploaded; the photos are read inside this browser tab.
    2. Read the card of each photo. A red box means the file contains GPS coordinates, that is, the place where it was taken. “Show details” lists the camera, lens, date, software, owner name and more.
    3. Under “What should be removed?”, choose Remove everything, Remove only the location, or Keep date and orientation. The cleaned files are made at once, and each card tells you what the saved file still contains.
    4. Press Download under a photo, or Download all as ZIP for the whole batch. On a phone, “Save to Photos / share” sends the cleaned files straight to your gallery or another app.

    What each option does to each kind of information

    The table shows what happens to the common pieces of metadata in a JPG, PNG or WebP photo. “Removed” means the information is gone from the saved file; “kept” means it is still there.

    InformationRemove everythingRemove only the locationKeep date and orientation
    GPS coordinatesRemovedRemovedRemoved
    City, state and country names (IPTC, XMP)RemovedRemovedRemoved
    Camera and lens model, exposure settingsRemovedKeptRemoved
    Date takenRemovedKeptKept
    OrientationKept (removed by “including orientation”)KeptKept
    Owner name, serial numbers, copyright lineRemovedKeptRemoved
    Software and editing historyRemovedKeptRemoved
    Embedded thumbnailRemovedKeptRemoved
    Colour profile and the picture itselfKeptKeptKept

    The colour profile is kept in every option because removing it would change the colours you see.

    Every card also re-reads the saved file and lists what is still in it, so you do not have to take the table on trust.

    Why the picture stays exactly as it was

    A JPG file is a row of segments, each starting with a marker and a length. The compressed picture sits in the scan segments at the end. This page walks along the row, leaves out the segments that hold information, and copies the rest byte for byte, so the image data in the cleaned file is identical to the original. Because nothing is decoded and compressed again, there is no quality loss and large files are cleaned in a moment.

    The one thing that cannot be done this way is HEIC. Browsers cannot write HEIC files, so a HEIC photo has to be drawn onto a canvas and saved as JPG, which does re-compress it once.

    Good to know

    • Choose “Remove only the location” when you want to keep the date and camera for your own records but share the photo with others. Choose “Remove everything” when you do not know who will see the file.
    • A phone held upright usually saves the photo with an orientation tag instead of turning the pixels. “Remove everything” keeps just that tag, because it is not personal information, so the photo still stands upright. Only “Remove everything, including orientation” drops it, and then some apps may show the photo sideways.
    • Screenshots and many photos saved from websites carry no location. The ones to check are photos straight from the camera app, and files you send by email, as a cloud link or by direct file transfer.
    • A photo without GPS can still give away where it was taken: a street sign, the view from a window, a licence plate. Removing metadata does not change the picture, so look at the picture too.
    • The date is shown the way the camera wrote it, in the camera’s local time. Most EXIF data does not record a time zone.
    • The cleaned copy gets a name ending in “-clean”. Your original file is never changed.

    How it works

    Where photo data hides

    EXIF is the block the camera writes: camera, lens, date, settings and the GPS position. XMP is a block of XML text that editing software and some phones add. IPTC is the older caption block from press photography, with names, keywords, a city and a copyright line. In a JPG, EXIF and XMP sit in APP1 segments and IPTC in an APP13 segment. A PNG keeps text in tEXt, zTXt and iTXt chunks and EXIF in an eXIf chunk, and a WebP keeps EXIF and XMP in chunks of their own. This tool cuts out exactly those pieces and copies everything else untouched.

    JPG

    JPG (JPEG) is the most widely supported photo format. It uses lossy compression, so files stay small, but it has no transparency and quality drops a little every time it is re-saved.

    PNG

    PNG uses lossless compression and supports transparency. It is ideal for screenshots, logos and graphics with sharp edges, but photos saved as PNG are much larger than JPG.

    HEIC

    HEIC (HEIF) is the format iPhones and iPads save photos in when the camera is set to High Efficiency. Apple says it compresses better than JPEG, so photos take less space at the same quality, but Windows needs extra extensions to open it and many websites do not accept it.

    Frequently asked questions

    Does removing the information lower the quality of my photo?

    No. For JPG, PNG and WebP the file is cut apart into its segments, the information segments are dropped, and every other byte, including the compressed picture, is copied unchanged. Nothing is decoded or re-compressed. The one exception is HEIC, which a browser cannot write: those photos are converted to JPG once at 92% quality.

    What exactly does each option remove?

    “Remove everything” drops EXIF (camera, date, GPS, thumbnail), XMP, IPTC, comments, other vendor blocks and any extra data appended after the picture, and keeps only the colour profile and, when the photo is not upright, a minimal EXIF holding just the orientation. “Remove everything, including orientation” drops that too. “Remove only the location” blanks the GPS block, location fields in XMP and the place names in IPTC, and leaves the rest. “Keep date and orientation” writes a new, minimal EXIF with only the date taken and the orientation.

    Will my phone photo turn sideways when the information is removed?

    Not with “Remove everything”, which keeps the orientation tag because it is not personal. Phones store a photo in the sensor’s orientation and add that tag to say how to turn it. Only “Remove everything, including orientation” drops the tag, and apps that do not read it then show the photo sideways.

    Can I remove the information from an iPhone HEIC photo without converting it?

    Not in a browser, which cannot write HEIC files, so this page converts HEIC photos to JPG without any metadata. To avoid the problem at the source, you can set the camera to “Most Compatible” in the iPhone camera format settings, which saves JPG, and the iPhone share sheet has an Options button with a Location switch for a single share.

    How can I be sure the location is really gone?

    After cleaning, every card reads the saved file again with the same reader and tells you what is left: for example “no location · still contains: date, orientation”. You can also drop the cleaned file into this page a second time and open its details.

    Is my photo uploaded to a server?

    No. The photo is opened and processed inside your browser tab, and the result is saved straight from there. You can even switch to airplane mode after the page has loaded and it keeps working.

    Related tools