Add a Watermark to Photos

Put your name, a copyright line or your logo on a photo before you publish it. Type any text in any language, or use a logo image, place it in one of nine spots or tile it across the picture, and see the result live. Set it up once and apply the same watermark to a whole batch. Your photos stay in this browser.

How to add a watermark to a photo

  1. Drop one or more photos into the box above, or click itTap the box above to choose photos. JPG, PNG, WebP, HEIC and AVIF can be opened.
  2. Choose Text or Logo image. For text, type your name or a © line, in any language. For a logo, choose an image file, best a PNG with a transparent background.
  3. Pick a position on the 3 × 3 grid, or “Tiled across the photo” to cover the whole picture. Then set size, opacity, angle, colour and shadow. The preview follows every change; with several photos, choose which one to preview.
  4. Press “Add watermark”. Download each photo, or Download all as ZIP. On a phone, “Save to Photos / share” sends them straight to your gallery or another app.

What each setting does

SettingWhat it controlsA good starting point
Text or logoWhat is drawn: any text, or an image fileText for a name or © line, a logo for a brand
PositionOne of nine spots, or tiled across the photoBottom right for a signature, tiled to protect a picture
SizeWidth of the mark as a share of the photo’s width20 to 35 percent in a corner, smaller when tiled
OpacityHow see-through the mark is40 to 60 percent for discreet, 70 or more to be seen
AngleRotation of the mark or of the whole tiled pattern0° in a corner, about −30° when tiled
Colour and shadowColour of the text, and a soft shadow behind itWhite with shadow on, or black on bright photos

These are suggestions, not rules. The live preview shows the effect on your own photo.

Corner mark or tiled mark

A mark in one corner hardly covers the picture and looks like a signature, but anyone can crop it away. A tiled mark runs over the whole picture, which makes it much harder to remove without leaving traces and also hides more of the photo. Pick the corner for portfolios and posts, and the tiled mark for previews of work you sell or send for approval.

Good to know

  • A white mark with a soft shadow stays readable on both light and dark parts of a picture. For a discreet mark try 40 to 60 percent opacity; raise it when the mark has to be seen.
  • A mark in a corner is easy to crop away. A tiled mark at a slight angle, for example −30°, is much harder to crop out, at the price of covering more of the picture.
  • Size is the width of the mark as a share of the photo’s width, so the same setting looks the same on a small photo and on a large one. That suits batches of mixed sizes.
  • Your settings are kept in this browser, so the same watermark is ready next time. The logo file itself is not stored, so choose it again. “Reset settings” clears what is remembered.
  • The saved photo has no EXIF data, so no location or camera information travels with it. If you only want to clean a photo without a watermark, use the metadata tool.
  • A watermark does not stop anyone from copying a picture. It only makes it harder to use without credit, and a tiled one more so than a corner mark.

How it works

How the watermark is drawn

The mark is drawn onto the photo’s pixels with the chosen opacity, so it becomes part of the picture and cannot be switched off later. The size is a fraction of the photo’s width, which makes the small preview look like the full-size result. A tiled mark is laid out in rows, every other row shifted by half a mark, and the whole pattern is turned by the chosen angle. The soft shadow is drawn in black behind light colours and in white behind dark ones, so the mark stays readable.

JPG

JPG (JPEG) is the most widely supported photo format. It uses lossy compression, so files stay small, but it has no transparency and quality drops a little every time it is re-saved.

PNG

PNG uses lossless compression and supports transparency. It is ideal for screenshots, logos and graphics with sharp edges, but photos saved as PNG are much larger than JPG.

Frequently asked questions

Can I use my own logo as the watermark?

Yes. Choose “Logo image” and pick a PNG, JPG, WebP or SVG file. A PNG with a transparent background looks best, because the logo is placed on the photo with its own transparency. The file is read in your browser and not uploaded.

Can I add the same watermark to many photos at once?

Yes. Add all the photos, set the watermark once and press the button. Every photo gets the same settings, scaled to its own size, and you can download them one by one or as a ZIP. If you change a setting afterwards, the results go back to “waiting” and are made again with the new setting.

Does it work with Korean, Japanese and other languages?

Yes. The text is drawn with the same fonts as this site (Inter, Pretendard and Noto Sans JP, plus Fraunces for serif), and characters those fonts do not have fall back to your device’s own fonts. Line breaks are allowed, so you can put a name on one line and a year on the next.

Does adding a watermark lower the quality of my photos?

The watermark is drawn onto the pixels, so each photo is saved once more. PNG is saved without loss. JPG and WebP are compressed again at 92% quality, which is very close to the original. Photos above about 16 megapixels are scaled down to that size first, because browsers run out of memory on bigger canvases.

Are my settings saved, and where?

Text, font, position, size, opacity, angle, colour and shadow are remembered in this browser’s local storage, on this device only, and they are never sent anywhere. “Reset settings” clears them. The logo file is not stored, so you choose it again next time.

Is my photo uploaded to a server?

No. The photo is opened and processed inside your browser tab, and the result is saved straight from there. You can even switch to airplane mode after the page has loaded and it keeps working.

Related tools