How to make the photo
- The photo type is already set to “Japanese passport (35×45 mm)”.
- Add a front-facing photo; the 35 × 45 mm frame is fitted to the face automatically.
- Put the top of the head (not the hair) on the red line and the chin inside the shaded band. The official head length is 32–36 mm, with 2–6 mm between the top edge and the head. Drag or zoom to adjust.
- For “Japanese passport (35×45 mm)”, download the 413 × 531 px photo or the print sheet. The Mynaportal file is kept within 600 KB; for a counter application at the prefectural passport office, print the sheet.
The 2–6 mm top margin, and where this tool puts the crown
The Japanese rule is one of the few that fixes the space above the head: 2–6 mm between the top edge and the crown. The tool puts the crown line at 4 mm, the middle of that range, and the chin band at 36–40 mm from the top, which leaves 5–9 mm below the chin.
The numbers leave little slack at the bottom. With the head at its maximum of 36 mm and the top gap at its maximum of 6 mm, only 3 mm of the 45 mm photo remains below the chin. Keep the crown on the line and the chin in the middle of the band rather than at an edge.
In the 413 × 531 px file (about 11.8 px per mm) the allowed top gap is roughly 24–71 px and the head 378–425 px, 71–80% of the photo’s height.
Why Japanese passport photos get sent back
The Ministry of Foreign Affairs (外務省) publishes examples of photos it considers unsuitable. Problems a home-made photo runs into most often:
- The face is too small or too large, or there is too much or too little space above the head.
- A shadow of the head on the wall behind, which breaks the “no background” rule.
- Light reflected in glasses, or frames over the eyes.
- Hair covering the eyes or the outline of the face.
- The head tilted, or the face turned slightly to one side.
- A blurred or grainy print, such as one made from a heavily zoomed phone photo.
Applying online through Mynaportal or at the passport counter
Since March 2023, some passport applications, such as renewals, can be made online through マイナポータル (Mynaportal) using a My Number Card. The Ministry of Foreign Affairs asks for the online face photo as a JPG file of 600 KB or less; it states no pixel size.
The 413 × 531 px file this page saves is the 35:45 print shape at 300 DPI. The download is automatically kept to 600 KB, so it can also be used for an online application; check the application screen for any other rule, such as taking the photo with the Mynaportal app’s camera. A counter application at your prefecture’s passport office needs a printed photo, which is what this page makes. Which applications can be made online is on the 外務省 website.
For a counter application, the L size sheet holds 3 photos and the 4 × 6 sheet holds 8. Measure one with a ruler before you hand it in: it should be exactly 45 mm tall.
Photo requirements
Japanese passport (35×45 mm)
- Size 45 mm high × 35 mm wide, without a border.
- Face from the crown to the chin: 32–36 mm; 2–6 mm between the top edge and the crown.
- Taken within 6 months of applying, only the applicant, facing forward.
- Plain background with no shadows, no hat.
- Online application (Mynaportal and others, per the Ministry of Foreign Affairs): the face photo is a JPG file of 600 KB or less. The download is automatically kept within that limit.
Frequently asked questions
Does the online application ask for a particular pixel size?
The Ministry of Foreign Affairs states only a JPG of 600 KB or less for the online face photo and gives no pixel size. The file saved here is 413 × 531 px and is kept within 600 KB. Check the application screen for other rules, such as using the Mynaportal app’s camera.
Can I use my Korean passport photo for a Japanese passport?
The size (35 × 45 mm) and the 32–36 mm head length are the same, but Japan also fixes 2–6 mm above the crown and asks for no background, while Korea asks for white. Make the Japanese photo on this page from the original image.
Where does the red crown line sit, and why not at 2 mm or 6 mm?
The tool puts it at 4 mm, the middle of the 2–6 mm range. With a 36 mm head and a 6 mm gap only 3 mm of the 45 mm photo is left below the chin, so the middle leaves room for error on both sides.
Questions that apply to every ID photo, such as printing at actual size, white backgrounds and privacy, are answered on the passport and ID photo maker and in the guide how to take a passport photo at home.
Guides that explain this
- Pixels, cm and DPI: how to convert, with tablesThe formula for pixels to cm and inches, print sizes at 300, 350 and 600 dpi, how to check a photo's dpi, and why changing only the dpi tag changes nothing.
- ID and passport photo sizes in mm and pixelsUS, UK, Schengen, Japanese and Korean passport and ID photo sizes in mm and pixels at 300 dpi, with head height, background and digital file rules.
- How to Take a Passport Photo at Home That Gets AcceptedLight, background, camera distance and head size for a passport or ID photo taken with a phone, printing it on a 4×6 sheet, and why photos get rejected.
- Print Passport Photos on 4×6: CVS, Walgreens, WalmartPrint passport and ID photos from a file on one 4×6 sheet at a US photo counter: what to upload, why 2×2 in matters, how to check the size with a ruler.
Related tools
Found a bug, or wish this tool did something more? Tell Leo, who runs Hanji. Send feedback